Table 2. Events organized by severity (continued)
Event ID
Message String
Severity
FQXSPEM4023I
One or more virtual drive are in abnormal status that may cause
unavailable virtual drive. Please check the event logs and if events are
targeted to the same disk then replace the drive. If necessary, contact
technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],
[arg5])
Informational
FQXSPEM4024I
The RAID controller detected one or more possible configuration
problem within the subsystem. Please check the event logs and if
events are targeted to the same disk then replace the drive. If
necessary, contact technical support for additional assistance.([arg1],
[arg2],[arg3],[arg4],[arg5])
Informational
FQXSPEM4025I
One or more virtual drive have problem. Please contact technical
support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
Informational
FQXSPEM4026I
Drive error was detected by RAID controller. Please contact technical
support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
Informational
FQXSPEM4027I
Drive error was detected by RAID controller. Please check the event
logs and if events are targeted to the same disk then replace the drive.
If necessary, contact technical support for additional assistance.
([arg1],[arg2],[arg3],[arg4],[arg5])
Informational
FQXSPEM4028I
The port [arg1] of PCIe device [arg2] at [arg3] has link [arg4].
Informational
FQXSPEM4029I
All PCIe slots on [arg1] may not be functional based upon your current
CPU population.
Informational
FQXSPEM4030I
A scheduled operation on the RAID controller has encountered an
issue. Refer to RAID Logs under Server Management, Local Storage,
for details.([arg1],[arg2],[arg3],[arg4],[arg5])
Informational
FQXSPEM4031I
SSD wear threshold setting is changed from [arg1] to [arg2] by user
[arg3] from [arg4] at IP address [arg5].
Informational
FQXSPEM4032I
Acoustic Mode [arg1] has been engaged. Fan speed limits are in
place.
Informational
FQXSPEM4033I
Acoustic Mode [arg1] has been disengaged to allow adequate
cooling.
Informational
FQXSPFC4000I
The bare metal connection process has been started.
Informational
FQXSPFC4001I
The bare metal update application reports a status of [arg1].
Informational
FQXSPFC4002I
System running in setup.
Informational
FQXSPFC4003I
UEFI deployment boot mode is enabled for NextBoot.
Informational
FQXSPFC4004I
UEFI deployment boot mode is enabled for NextAc.
Informational
FQXSPFC4005I
UEFI deployment boot mode has been disabled.
Informational
FQXSPFW0003I
The System [ComputerSystemElementName] encountered firmware
progress.
Informational
FQXSPFW2001I
The System [ComputerSystemElementName] has detected a POST
Error deassertion.
Informational
FQXSPIO2003I
System [ComputerSystemElementName] has recovered from a
diagnostic interrupt.
Informational
FQXSPIO2004I
Bus [SensorElementName] has recovered from a bus timeout.
Informational
42
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
Summary of Contents for 7X20
Page 225: ......
Page 226: ...Part Number SP47A24248 Printed in China 1P P N SP47A24248 1PSP47A24248 ...