Lenovo 7X20 Manual Download Page 197

Page: 197 / 226

Table 4. Events organized by severity (continued)

Event ID

Message String

Severity

FQXPMCL0005K

Current System Boot Mode is Legacy. OS Clone only support UEFI
Mode.

Warning

FQXPMCL0006K

Failed to export raid config.

Warning

FQXPMCL0007K

Failed to import raid config.

Warning

FQXPMCL0008K

Failed to export uefi settings.

Warning

FQXPMCL0009K

Failed to import uefi settings.

Warning

FQXPMCL0010K

Failed to export bmc settings.

Warning

FQXPMCL0011K

Failed import bmc settings.

Warning

FQXPMNM0001G

Failed to set new BMC network parameters.

Warning

FQXPMOS0001K

Bootx64.efi is not found. Failed to Boot OS.

Warning

FQXPMOS0002K

Failed to read Deployment Manager Signature from USB.

Warning

FQXPMOS0003K

Failed to copy Windows boot files to target

Warning

FQXPMOS0004K

BMC Communication Failed: EMMC2USB Mount Failure.

Warning

FQXPMOS0005K

BMC communication failed: DRIVER Mount Failure.

Warning

FQXPMOS0006K

BMC communication succeeded. Volume Name MISMATCHED.

Warning

FQXPMOS0007K

Failed to read License RTF file.

Warning

FQXPMOS0008K

Make sure the Ethernet cable has been plugged into your computer
and your network settings are correct.

Warning

FQXPMOS0009K

Current System Boot Mode is Legacy. LXPM OS installation only
support UEFI Mode.

Warning

FQXPMRS0011K

Failed to change disk drives' state.

Warning

FQXPMSR0001K

Found unsupported RAID adapter.

Warning

FQXPMSR0021L

Failed to create new virtual disk.

Warning

FQXPMSR0031L

Failed to remove existing virtual disk

Warning

FQXPMUP0001K

The system configuration does not meet the prerequisite

Warning

FQXPMUP0002K

The selected packages are not compatible

Warning

FQXPMUP0003K

Unable to obtain the minimum level of UEFI

Warning

FQXPMUP0004K

Unable to obtain the installed version of UEFI

Warning

FQXPMUP0005K

Unable to obtain the installed version of BMC

Warning

FQXPMUP0006K

Unable to obtain the installed version of LXPM

Warning

FQXPMUP0007K

Unable to obtain the installed version of linux driver

Warning

FQXPMUP0008K

Unable to obtain the installed version of windows driver

Warning

FQXPMVD0001H

Failed to get VPD data.

Warning

FQXPMVD0002H

Failed to update the VPD data.

Warning

FQXPMVD0011K

Failed to get the TPM/TPM card/TCM policy status

Warning

Chapter 5

XClarity Provisioning Manager events

193

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands