Lenovo 7X20 Manual Download Page 216

Page: 216 / 226

•

FQXPMUP0203M: BMC communication failed: EMMC2USB unmount failure. Failed to update the

firmware

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Reflash the BMC firmware

3. If the problem persists, perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

4. If the problem persists, try a different Lenovo tool to perform the update (eg. XClarity Administrator,

XClarity Controller, or XClarity Essential OneCLI).

5. If the problem persists, contact technical support.

•

FQXPMUP0204M: BMC communication failed: Execute the update cmd failure. Failed to update the

firmware

Severity: Error

User Action:

1. Restart BMC via supported method.

2. Reflash BMC firmware.

3. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

4. If the problem persists, try a different Lenovo tool to perform the update (eg. XClarity Administrator,

XClarity Controller, or XClarity Essential OneCLI).

5. If the problem persists, contact technical support.

•

FQXPMUP0205M: BMC communication failed: Get the update status failure.Failed to update the

firmware

Severity: Error

User Action:

1. Restart BMC via supported method and reboot the system.

2. Reflash BMC firmware.

3. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

4. If the problem persists, try a different Lenovo tool to perform the update (eg. XClarity Administrator,

XClarity Controller, or XClarity Essential OneCLI).

5. If the problem persists, contact technical support.

•

FQXPMUP0206M: The level of the update package is too old. Failed to update the firmware.

Severity: Error

User Action:

212

ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute

Node Messages and Codes Reference

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands