Lenovo 7X20 Manual Download Page 190

Page: 190 / 226

•

FQXSFPU4042I: TPM Firmware update is finished, rebooting system to take effect.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4043G: TPM Firmware update aborted. System is rebooting...

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4044I: The current TPM firmware version could not support TPM version toggling.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4045G: Physical Presence is not asserted, abort TPM Firmware upgrade.

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4046I: TPM Firmware will be updated from TPM1.2 to TPM2.0.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4047I: TPM Firmware will be updated from TPM2.0 to TPM1.2.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4049I: TPM Firmware update successful.

Severity: Info

User Action:

Information only; no action is required.

•

FQXSFPU4050G: Failed to update TPM Firmware.

Severity: Warning

User Action:

Information only; no action is required.

•

FQXSFPU4051G: Undefined TPM_TCM_POLICY found

Severity: Warning

User Action:

Complete the following steps:

186

ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute

Node Messages and Codes Reference

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands