Lenovo 7X20 Manual Download Page 162

Page: 162 / 226

Table 3. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSFMA0008M

DIMM [arg1] has failed the POST memory test. [arg2]

Error

FQXSFMA0009K

Invalid memory configuration for Mirror Mode. Please correct memory
configuration. [arg1]

Error

FQXSFMA0010K

Invalid memory configuration for Sparing Mode. Please correct
memory configuration. [arg1]

Error

FQXSFMA0023M

Error has occurred in NVDIMM flash. NVDIMM backup/restore may
not operate correctly. [arg1]

Error

FQXSFMA0024M

Error has occurred in NVDIMM Supercap. NVDIMM backup/restore
may not operate correctly. [arg1]

Error

FQXSFMA0025M

NVDIMM Supercap has been disconnected. NVDIMM will lose its
backup ability until this is corrected. [arg1]

Error

FQXSFMA0027K

Invalid memory configuration (Unsupported DIMM Population)
detected. Please verify memory configuration is valid.[arg1]

Error

FQXSFMA0028K

Memory Capacity exceeds CPU limit. [arg1]

Error

FQXSFMA0032M

Intel Optane DCPMM [arg1] has no remaining spares block.

Error

FQXSFMA0042K

Intel Optane DCPMM is not supported by processor of this system.

Error

FQXSFPU0001N

An unsupported processor has been detected.

Error

FQXSFPU0002N

An invalid processor type has been detected.

Error

FQXSFPU0003K

A processor mismatch has been detected between one or more
processors in the system.

Error

FQXSFPU0004K

A discrepancy has been detected in the number of cores reported by
one or more processors within the system.

Error

FQXSFPU0005K

A mismatch between the maximum allowed UPI link speed has been
detected for one or more processors.

Error

FQXSFPU0006K

A power segment mismatch has been detected for one or more
processors.

Error

FQXSFPU0007K

Processors have mismatched Internal DDR Frequency

Error

FQXSFPU0008K

A core speed mismatch has been detected for one or more
processors.

Error

FQXSFPU0009K

An external clock frequency mismatch has been detected for one or
more processors.

Error

FQXSFPU0010K

A cache size mismatch has been detected for one or more
processors.

Error

FQXSFPU0011K

A cache type mismatch has been detected for one or more
processors.

Error

FQXSFPU0012K

A cache associativity mismatch has been detected for one or more
processors.

Error

FQXSFPU0013K

A processor model mismatch has been detected for one or more
processors.

Error

FQXSFPU0014N

A processor family mismatch has been detected for one or more
processors.

Error

158

ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute

Node Messages and Codes Reference

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands