Lenovo 7X20 Manual Download Page 184

Page: 184 / 226

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0011K: A cache type mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0012K: A cache associativity mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0013K: A processor model mismatch has been detected for one or more processors.

Severity: Error

User Action:

Complete the following steps:

1. Verify that matching processors are installed in the correct processor sockets. Correct any mismatch

found.

2. Check the Lenovo support site for an applicable service bulletin or firmware update that applies to

this processor error.

3. If the problem persists, collect Service Data logs.

4. Contact Lenovo Support.

•

FQXSFPU0014N: A processor family mismatch has been detected for one or more processors.

Severity: Error

User Action:

180

ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute

Node Messages and Codes Reference

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands