Lenovo 7X20 Manual Download Page 205

Page: 205 / 226

5. If the problem persists, perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, contact technical support.

•

FQXPMOS0003K: Failed to copy Windows boot files to target

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, contact technical support.

•

FQXPMOS0004K: BMC Communication Failed: EMMC2USB Mount Failure.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, contact technical support.

•

FQXPMOS0005K: BMC communication failed: DRIVER Mount Failure.

Severity: Warning

User Action:

1. Ensure proper operation of the virtual USB connection.

2. Restart BMC via supported method and reboot the system.

3. Reflash BMC firmware.

4. Retry OS deployment.

5. Perform AC reset or virtual reseat.

Note:

When performing AC reset, after powering off AC, wait several seconds before powering on

AC. After AC power is restored, power on the host system.

6. If the problem persists, contact technical support.

•

FQXPMOS0006K: BMC communication succeeded. Volume Name MISMATCHED.

Chapter 5

XClarity Provisioning Manager events

201

Summary of Contents for 7X20



































































































































































































































Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands

Lenovo 7X20, Manual

Search results

Summary of Contents for 7X20

Reviews:

Related manuals for 7X20

Brands by name

Popular brands