WavePro 7 Zi and Zi-A Oscilloscopes
65
WP7Zi-GSM-E RevB
1.
Touch
Timebase → Horizontal Setup
on the menu bar.
2.
Click the
Sequence
tab.
3.
Under
Acquisition Settings
, touch inside the
Num Segments
data
entry field and enter the number of segments you want to display,
using the slider bar at the bottom of the window. Click the
keypad
button
(as follows) on the slider bar to enter a value using the pop-
up numeric keypad.
Note
: The number of segments you choose to display can be less
than the total number of segments in the waveform. For example,
in the pop-up images above, the number of display segments is
10, but the total number of segments entered in the timebase
dialog's
Num Segments
field is 100.
4.
Touch the
Enable Timeout
checkbox.
5.
Touch inside the
Timeout
data entry field and enter a timeout
value, using the slider bar at the bottom of the window. Click the
keypad button
(as follows) on the slider bar to enter a value using
the pop-up numeric keypad.
Note
: Use the sequence mode timeout to automatically interrupt the
sequence acquisition if the timeout value is exceeded without a valid
trigger. The timeout period accounts for instances when a
Num
Segments
miscount occurs for some reason and the oscilloscope waits
indefinitely for an unforthcoming segment. During that time, no
oscilloscope functions are accessible. By means of a timeout value,
however, the acquisition will be completed, the waveform displayed, and
control of the oscilloscope returned to the user after the timeout has
elapsed.
5.
Under
Display Settings
, touch inside the
Display mode
field, and
select a sequence mode display from the pop-up menu.
