WavePro 7 Zi and Zi-A Oscilloscopes
149
WP7Zi-GSM-E RevB
1.
Select either
Memory
or
File
by touching either respective button
on the
Recall From
portion of the dialog.
Note
: When
Memory
is selected, only
Source
,
Destination
, and
Show on recall
controls are shown on the Recall Waveform dialog.
When
File
is selected, many more controls are available.
Regardless, the controls are used as explained in the following
steps.
2.
If recalling from Memory, touch inside the
Source
field and select a
source stored in non-volatile RAM (M1–M4) from the
Select Source
pop-up.
3.
Touch inside the
Destination
field and select a location for storage
(memory or file) from M1 to M4.
4.
Show on Recall
- Mark this checkbox to have the memory trace
shown on the grid display after recalling the waveform.
5.
When saving a File, touch inside the
Show only files
field and select
an area to limit the search (
channels
,
math functions
, or
memory
).
6.
Touch inside the
Recall files from directory
data entry field and
enter the path using the pop-up keyboard. You can also touch the
Browse
button and navigate to the file. Touch inside the
Next file
will be recalled from data entry
field and enter the path using the
pop-up keyboard. Or, touch the
Browse
button to navigate to the
file.
7.
Up /Down arrows
- Use these buttons to cycles through files in the
selected folder from the
Show only files
control.
8.
When finished, touch the
Recall Now!
button.
