LeCroy WavePro 7 Zi series Getting Started Manual Download Page 154

Page: 154 / 197

Getting Started Manual

WP7Zi-GSM-E RevB

154

Export the contents of the event log to an ASCII text file by touching
the

Show Remote Control Log

button. The

Event Logs

pop-up is

shown. Touch inside the

DestFilename

data entry field and enter a

file name using the pop-up keyboard.

Then, touch the

Export to Text File

button.

Printing and Hardcopy Functions

Your instrument provides the ability to output files to printers or plotters
print to file, or e-mail your files. Any Microsoft Windows® supported
printer is supported by your instrument.

The following Printing and Hardcopy procedures are explained here.



Printer Setup



Adding Printers and Drivers



Default Printer Setup



Printing Screen Images



Printing



Clipboard



File



E-mail

Printer Setup

Touch

File → Print Setup

on the menu bar. The Utilities

Hardcopy

dialog opens.

Press the P

RINT

front panel button. Then, touch the

Print Setup

button on the

Print

flyout menu.

Touch

Utilities → Utilities Setup

and click the

Hardcopy

tab.

On the Hardcopy dialog, touch the

Printer

icon.

Summary of Contents for WavePro 7 Zi series






































































































































































































Search results

Summary of Contents for WavePro 7 Zi series

Reviews:

Brands by name

Popular brands

LeCroy WavePro 7 Zi series, Getting Started Manual

Search results

Summary of Contents for WavePro 7 Zi series

Reviews:

Brands by name

Popular brands