WavePro 7 Zi and Zi-A Oscilloscopes
119
WP7Zi-GSM-E RevB
M
ATH
F
UNCTION
S
ETUP
This setup mode allows you to quickly apply frequently used math
functions.
1.
Touch
Math → Math Setup
on the menu bar.
2.
If there are math functions already assigned to
F1
through
Fx
(the
number of math functions that can be performed at the same time
depends on the software options loaded on your oscilloscope, see
Specifications
for details), touch the checkbox for the function you
want to enable.
3.
Assign a new math function to a trace by touching the
Fx
button for
that trace.
The math function pop-up menu is then shown.
4.
Select a function from the pop-up; the selected function is
automatically assigned, with the same setups as were in place for
the last function in that Fx position.
5.
If you want to change other setup items, like the source waveform,
touch the appropriate Fx tab.
The setup dialog for that Fx position is then shown.
6.
Touch the
Single
function button if you want to perform just one
math function on the trace, or touch the
Dual
function button to
perform math on math (shown respectively, as follows).
7.
Touch the
Graph
button, and then touch inside the
Graph with
field
to select a graph mode. The Graph modes are as follows:
