Getting Started Manual
WP7Zi-GSM-E RevB
162
Pass/Fail
- Allows you to set pulse duration from 1 µs to 131 ms;
generates a pulse when pass/fail testing is active and conditions are
met.
Aux Output Off -
This function turns off the auxiliary output signal.
Please refer to the previous Auxiliary Output Signal topic in the Connecting
section for more information.
Auxiliary Output Setup
1.
Touch
Utilities → Utilities Setup
on the menu bar.
2.
Touch the
Aux Output
tab.
3.
If you want a 1 kHz, 1 V Square Wave, touch the
Set to 1 kHz, 1 V
Square Wave
button.
OR
If you want a specialized output, touch one of the following buttons
under
Use Auxiliary Output For
:
Square Wave
,
Trigger Enabled
,
Trigger Out
,
Pass/Fail
,
or Off
.
Note
: If you choose
Pass/Fail
, touch inside the
Pulse Duration
field (if
applicable) and enter a value from 1 µs to 131 ms, using the pop-up
numeric keypad.
4.
If applicable, touch inside the
Amplitude
data entry field and enter
a value, using the slider bar at the bottom of the window. Click the
keypad button
(as follows) on the slider bar to enter a value using
the pop-up numeric keypad.
5.
Touch inside the
Frequency
data entry field and enter a value, using
the slider bar at the bottom of the window. Click the
keypad button
(as follows) on the slider bar to enter a value using the pop-up
numeric keypad.
