manualshive.com logo in svg

LAWO POWER CORE, User Manual

Introducing the LAWO POWER CORE user manual – your comprehensive guide to unlocking the full potential of your device. With easy-to-understand instructions and step-by-step diagrams, this manual is available for free download at manualshive.com. Empower yourself with the knowledge to maximize your experience with this remarkable product.

Share
Download
background image

POWER CORE User Manual

Version: V6.0.0/5

398/459

20. Maintenance

20.2.5 The RAVENNA Menu

The RAVENNA menu contains 7 tabs. Most of these are informational in nature, although it is possible to change
a  few  options  using  options  found  on  the  “Global”  and  “PTP”  tabs.  This  information  may  be  used  for
troubleshooting and to determine the presence and activity of configured streams.

Global Tab

The 

Global

 tab displays Power Core’s RAVENNA channel addresses and ports which have  been  preconfigured

using On Air Designer. Channels may be enabled or disabled using adjacent check boxes.

As a convenience, you may enter new temporary settings, but we strongly recommend that new permanent
values be configured using On Air Designer as temporary changes will be lost after Power Core reboot. Any
temporary changes made require RAVENNA to be restarted in order to take effect.

·

mDNS Channels.

 Four Power Core RAVENNA channel addresses using the multicast Domain Name

System

 

defined in IETF

 

RFC 6762 are displayed, with their multicast IP addresses and port numbers. 

·

SAP  Channels. 

Same  as  above,  except  displays  channel  information  which  uses  the  Session

Announcement Protocol defined in IETC RFC 2974.

·

Control

 shows whether RAVENNA is currently running or stopped.

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for POWER CORE

Radio Shack 32-2058 User Manual preview
32-2058
Brand: Radio Shack Pages: 24
Hear Technologies hear back octo Quick Start Manual preview
hear back octo
Brand: Hear Technologies Pages: 2
P.Lindberg 9018936 Original Instructions For Use preview
9018936
Brand: P.Lindberg Pages: 41
Onerr Copper Tremolo CT-1 User Manual preview
Copper Tremolo CT-1
Brand: Onerr Pages: 11
Skyfood BPS-06-N Instruction Manual preview
BPS-06-N
Brand: Skyfood Pages: 24
DAPAudio MMIX-4 Manual preview
MMIX-4
Brand: DAPAudio Pages: 15
Effectrode Delta-Trem Owner'S Manual preview
Delta-Trem
Brand: Effectrode Pages: 4
Studer OnAir 2000M2 Operating And Service Instructions preview
OnAir 2000M2
Brand: Studer Pages: 449
Super Seek Trem Z.Vex Effects Instructions preview
Z.Vex Effects
Brand: Super Seek Trem Pages: 4
INOXPA ME-1100 Installation, Service And Maintenance Instructions preview
ME-1100
Brand: INOXPA Pages: 24
Eldom R113 User Manual preview
R113
Brand: Eldom Pages: 16
Arrakis Systems ARC BLUETOOTH Operational Instructions preview
ARC BLUETOOTH
Brand: Arrakis Systems Pages: 8
Rane FPM 42 Operating And Service Manual preview
FPM 42
Brand: Rane Pages: 4
Shift Line Prism II User Manual preview
Prism II
Brand: Shift Line Pages: 22
MECNOSUD SP100 Instruction Manual preview
SP100
Brand: MECNOSUD Pages: 35
Lithium Grim Supreme Leader Building Instructions preview
Supreme Leader
Brand: Lithium Grim Pages: 10
Lithium Grim OmniRat Building Instructions preview
OmniRat
Brand: Lithium Grim Pages: 9
Lithium Grim Magnum Building Instructions preview
Magnum
Brand: Lithium Grim Pages: 8

Brands by name

Popular brands

Load more brands