LAWO POWER CORE User Manual Download Page 419

Page: 419 / 459

POWER CORE User Manual

Version: V6.0.0/5

419/459

20. Maintenance

Now click on the update button

from the menu tool bar, and then click on

Yes

to confirm and start

the update.

The update button is only available if you have selected some modules.

When the update is complete, press the refresh button

and check the software status for the

updated modules.

Remember that after updating, it is necessary to

transfer

the configuration.

Finally, test the system to check that everything is functioning correctly.

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands

LAWO POWER CORE, User Manual

Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands