POWER CORE User Manual
Version: V6.0.0/5
253/459
15. Connecting a VisTool MK2 PC
15.4
DSP Parameter Control
PARM
buttons allow the user to adjust signal processing parameters from the VisTool screen. The controls
always work on the fader in access, and so you may wish to add some ACCESS keys to the screen layout (as
described
). PARM buttons are usually combined with Access Source Information to provide feedback on the
source and its parameter values. The configuration requires two stages: first use the ON-AIR Designer to prepare
the system configuration, and then use VisTool Editor to edit the VisTool project.
System Configuration
1.
Add a
PARM Control
panel to slot 15 of the
2.
Name the panel from its
General
tab:
VisTool Editor Configuration
1.
Add some Buttons to a new Page.
2.
Right-click on a button, and open up the
MF Key
->
Parm Control Panel
branch. Select the parameter
you wish to assign to the VisTool button - there are many options including Aux on/off and +/- for most DSP
parameters:
As you assign each button, it updates to show the name of the function.
The
Access 01
to
Access 40
options are for backwards compatibility only. To assign the Access key for a
fader strip to a VisTool button use the method described below.
3.
Remember to save the project and switch to Test mode to test your parameter control.
