manualshive.com logo in svg

LAWO POWER CORE, User Manual

Introducing the LAWO POWER CORE user manual – your comprehensive guide to unlocking the full potential of your device. With easy-to-understand instructions and step-by-step diagrams, this manual is available for free download at manualshive.com. Empower yourself with the knowledge to maximize your experience with this remarkable product.

Share
Download
background image

POWER CORE User Manual

Version: V6.0.0/5

199/459

13. Control Surface Configuration

13.4.4 Fader Mappings

Any fader strip can be mapped to a different control surface position using fader mappings. The system works by
giving every fader strip a unique mapping ID. This includes faders on Layer 1 and Layer 2 for all Fader Modules.

MF Keys, defined by the configuration, can then reassign any fader ID to any control surface position. For
example, a fader can be cloned by assigning the same ID to two positions. Move one of the cloned faders, and
the other follows; select a new source for the fader, and the other follows.

Fader Mapping IDs

Fader Clone Example

The mapping numbers identify both layers. Therefore Module 1 contains Faders 1 to 4 and 5 to 8; Module 2 starts
at Fader 9 and so on.

There are three main applications for fader mappings:

·

To clone a fader - as shown above.

·

To move fader strips – for example, to rearrange the layout for different types of production.

·

To map invisible fader strips onto physical faders – to create additional "layers".

The first two applications are particularly useful for multi-operator layouts, as faders can be cloned at different
operator stations, or the control surface can be re-configured from single to multi-user.

In the configuration, use the 

Channel Mappings

 tab (in the "Surface -> Fader Module" branch of the 'Tree

Definition') to configure fader mappings.

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for POWER CORE

Hamilton Beach 950 Operation And Maintenance Manual preview
950
Brand: Hamilton Beach Pages: 24
Behringer EURORACK UB1202FX Technical Specifications preview
EURORACK UB1202FX
Brand: Behringer Pages: 3
Roland GR-S Owner'S Manual preview
GR-S
Brand: Roland Pages: 12
Onerr Copper Tremolo CT-1 User Manual preview
Copper Tremolo CT-1
Brand: Onerr Pages: 11
X-keys XF-10-USB-R Product Manual preview
XF-10-USB-R
Brand: X-keys Pages: 4
Yellowtec intellimix Manual preview
intellimix
Brand: Yellowtec Pages: 32
Alto BETAVERB User Manual preview
BETAVERB
Brand: Alto Pages: 35
Meyer F585 2018 Owner'S/Operator'S Manual preview
F585 2018
Brand: Meyer Pages: 92
Source Audio Soleman User Manual preview
Soleman
Brand: Source Audio Pages: 39
Hamilton Beach Eclectrics 63220 User Manual preview
Eclectrics 63220
Brand: Hamilton Beach Pages: 70
Oursson HM4001 Instruction Manual preview
HM4001
Brand: Oursson Pages: 9
Shure M63 AUDIO MASTER Techical Data preview
M63 AUDIO MASTER
Brand: Shure Pages: 6
Orava RM-208 B Instruction Manual preview
RM-208 B
Brand: Orava Pages: 18
LOOPTROTTER SATUR-8/24 Owner'S Manual preview
SATUR-8/24
Brand: LOOPTROTTER Pages: 9
Oster 2502 Instructions Manual preview
2502
Brand: Oster Pages: 6
Nokia N-GAGE QD User Manual preview
N-GAGE QD
Brand: Nokia Pages: 210
Samson MDR 16 Specification Sheet preview
MDR 16
Brand: Samson Pages: 2
Philips DCM3100 Brochure & Specs preview
DCM3100
Brand: Philips Pages: 3

Brands by name

Popular brands

Load more brands