POWER CORE User Manual
Version: V6.0.0/5
200/459
13. Control Surface Configuration
Channel Mapping Parameters
Open the "Surface -> Fader Module" branch of the 'Tree Definition', and select the
Channel Mapping
tab to
configure fader mappings.
Default Map
Activate
Assigns a control signal to activate the default fader mapping.
Map n
Activate
Assigns a control signal to activate.fader mapping 1 to 12.
Map n
1.1, 1.2, 1.3, 1.4, etc.
Enter the fader ID numbers which will be mapped to the Fader Module when the
Map n
Activate
control signal is true.
·
Use 1.1 to 1.4 to map Layer 1, strips 1 to 4.
·
Use 2.1 to 2.4 to map Layer 2, strips 1 to 4.
You must enter the absolute fader ID, which is counted from 1 through to 8 for each Module
(faders 1 to 4 on Layer 1, and faders 5 to 8 on Layer 2). For example, to map the third fader
on the second layer of Module 2, you would enter 15 (as the second layer of Module 2 is
counted as faders 9 to 16).
