LAWO POWER CORE User Manual Download Page 181

Page: 181 / 459

POWER CORE User Manual

Version: V6.0.0/5

181/459

12. Intercom

12.4.10 Using Groups

Any number of InterCom stations can be grouped together, allowing a single button to call more than one station.

To Create a Group

In the Group area (bottom left), double-click on the first empty

field to enter a new Group number - the

cursor flashes.

Enter a unique number.

This number will be used to reference the group within the InterCom operating window.

Then click on the

Name

field and type in a name for the InterCom station.

You can enter up to 6 characters.

Defining the Group

Double-click on the Group (bottom left) to view its definition (bottom right).

Click on the first empty

field and select the first InterCom station you wish to group:

Once selected, the

Name

field updates automatically.

Repeat to select all the stations for the group. Our example shows a group named

ALL

which contains

Studio 1

Studio 2

and

Studio 3

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands

LAWO POWER CORE, User Manual

Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands