LAWO POWER CORE User Manual Download Page 241

Page: 241 / 459

POWER CORE User Manual

Version: V6.0.0/5

241/459

14. Snapshots System

Edit User

This option is used to create and edit users. You can define:

which user groups they belong to (and therefore which snapshot groups they can access).

their user name and password.

their default snapshot group (opens when they choose to load or save snapshots).

their login snapshots (these are snapshots which load automatically after the user logs in).

To create or edit a User

From the

Admin page

, select

Edit User

- the 'Edit User' window appears, with a list of users on the left

(User), and the user groups they belong to on the right (Group):

To create a new user, select

New

. (Or, to edit an existing user, select a name and then

Properties

) -

the 'User Properties' window appears:

Select the

General

tab to edit the:

User

- enter a name for the user, e.g.

sue.

Password

- enter a password for the user (the default is

0000

). This can be changed by the user once

they login, see

Changing Your Password

Reset

- resets the user's password to

0000

. (Very useful if a user forgets their password).

Comment

- you can enter comments if you wish.

User Groups

and

Member of

- defines which user groups the user belongs to (see next page).

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands

LAWO POWER CORE, User Manual

Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands