LAWO POWER CORE User Manual Download Page 237

Page: 237 / 459

POWER CORE User Manual

Version: V6.0.0/5

237/459

14. Snapshots System

Edit Group

This option is used to create and edit user groups. You can define:

which snapshot groups can be accessed, and whether users can load, save and delete snapshots.

whether the user group has Admin page access.

which console operations ("rights") are available to users within the group.

To create or edit a User Group

From the

Admin page

, select

Edit Group

- the 'Edit User Group' window appears, with a list of user

groups on the left (

Group

), and the snapshot groups they may access on the right (

Snap Group

To create a new user group, select

New

. (Or, to edit an existing group, select its name and then

Properties

) - the 'User Group Properties' window appears:

Select the

General

tab to edit the:

Groupname

- enter a name for the user group, e.g.

DJs

Comment

- you can enter comments if you wish.

Admin

- tick this box to enable Admin access. This allows all users within the group to open and edit the

Admin pages.

Snap Groups

- this area defines the snapshot groups which users can access (see next page). On the

left are all snapshot groups defined in the

VisTool snaphots database

. On the right are the snapshot

groups which are available to the user group.

Summary of Contents for POWER CORE












































































































































































































































































































































































































































































Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands

LAWO POWER CORE, User Manual

Search results

Summary of Contents for POWER CORE

Reviews:

Related manuals for POWER CORE

Brands by name

Popular brands