POWER CORE User Manual
Version: V6.0.0/5
133/459
9. Audio Mix Engine
9.9.3
Signal Present Indication (on the Surface)
Open the "System -> Definition -> Parameter = Signal Present" branch of the 'Tree Definition' to define the signal
present metering on the Fader Modules (the fader strip backlight).
The fader strip backlight can be configured to show signal present, source colour or to run in mix mode for
each source configured in the "Source" branch of the 'Tree Definition', see
Parameter
Signal Present – reference name for the element.
State 1 to 8 Thrs
Enter the threshold level (dBR) at which you wish the backlight to illuminate.
Low
Tick this box for half lit.
Blink
Tick this box for flashing.
Color
Select the color for the illumination.
In our example, the signal present indicator will illuminate as follows:
·
Signals > -30dBR – green.
·
Signals > -9dBR – half-lit yellow.
·
Signals > -3dBR – fully-lit yellow.
·
Signals > 0dBR – half-lit red.
·
Signals > 6dBR – fully-lit red.
