Advanced Configuration
136
Caution:
The FTP server software needs to be running during log upload.
3. View the running log, as shown in the following figure.
Figure 134 Running Log Query
Performance log
Portfolio: {Index, LogType, Time, Description}
Function: Display the current running log.
6.24 Unicast Address Configuration and Query
6.24.1 Overview
When forwarding a packet, the switch searches for the forwarding port in the MAC address
table based on the destination MAC address of the packet.
A MAC address can be either static or dynamic.
Static MAC address are configured. They have the highest priority (not overridden by
dynamic MAC addresses) and are permanently valid.
Dynamic MAC addresses are learned by the switch in data forwarding, which are valid only
for a certain period. The switch periodically updates its MAC address table. When receiving
a data frame to be forwarded, the switch learns the source MAC address of the frame,
establishes a mapping with the receiving port, and queries the forwarding port in the MAC
address table based on the destination MAC address of the frame. If a match is found, the
switch forwards the data frame from the corresponding port. If no match is found, the switch
broadcasts the frame in its broadcast domain.
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
