Advanced Configuration
135
Figure 132 Log Status Configuration
Enable Runlog
Options: Enable/Disable
Default: Enable
Function: Enable or disable the running log function. If the function is enabled, running
information will be recorded.
2. Configure running log upload, as shown in the following figure.
Figure 133 Running Log Upload
FTP Server IP Address
Format: A.B.C.D
Function: Set the IP address of the FTP server.
FTP File Name
Range: 1~20 characters
Function: Set the name of the log file saved on the server.
FTP User Name
Range: 1~20 characters
Function: Set the FTP user name.
FTP Password
Range: 1~20 characters
Function: Set the FTP password.
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
