Advanced Configuration
115
Function: Display the latest time obtained from the server.
Device Time
Function: Display the time of the device.
update
Options: automatism/manual
Default: automatism
Function: Select the time synchronization mode between the device and the server.
3. View SNTP configuration, as shown in the following figure. You can click the check box of
an SNTP server and click <Delete> to delete it.
Figure 115 SNTP Configuration
Server State
Options: active/repose
Description: The active server provides SNTP time for the client. Only one server can be in
active state at a time.
Synchronization
To synchronize time manually, click <Synch>.
4. Configure the switch as the SNTP server, as shown in the following figure.
Figure 116 Configuring the Switch as the SNTP Server
SNTP State
Options: Enable/Disable
Default: Disable
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
