Advanced Configuration
53
Figure 54 Enabling IGMP Snooping
IGMP Snooping Status
Options: Enable/Disable
Default: Disable
Function: Enable or disable IGMP Snooping. IGMP Snooping and static multicast/GMRP
cannot be enabled at the same time.
Auto Query Status
Options: Enable/Disable
Default: Disable
Function: Enable or disable auto query for querier election.
Description: The auto query function can be enabled only if IGMP Snooping is enabled.
Caution:
The auto query function on a network shall be enabled on at least one switch.
IGMP Cross Status
Options: Enable/Disable
Default: Disable
Function: If the function is enabled, report and leave packets can be forwarded by the DT
ring ports.
2. View the multicast member list, as shown in the following figure.
Figure 55 IGMP Snooping Member List
IGMP Member List
Combination: {MAC, VLAN ID, Member}
In the FDB multicast table dynamically learned through IGMP Snooping, the VLAN ID is the
VLAN ID of member ports.
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
