Device Status
16
FE/FX/GE/GX indicate port types.
FE: 10/100Base-TX RJ45 port
FX: 100Base-FX port
GE: Gigabit RJ45 port
GX: Gigabit SFP slot
Administration Status
Display the administration status of ports.
Enable: The port is available and permits data transmission.
Disable: The port is locked without data transmission.
Operation Status
Display the operation status of ports.
Link
Display the link status of ports.
Up: The port is in LinkUp state and can communicate normally.
Down: The port is in LinkDown state and cannot communicate normally.
Speed
Display the communication speed of LinkUp ports.
Duplex
Display the duplex mode of LinkUp ports.
Full-duplex: The port can receive and transmit data at the same time.
Half-duplex: The port only receives or transmits data at the same time.
Flow Control
Display the flow control status of LinkUp ports.
RX
Options: Enable/Disable
Enable: The port can receive data.
Disable: The port cannot receive data.
TX
Options: Enable/Disable
Enable: The port can transmit data.
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...