Advanced Configuration
125
Range: 100ms~327600ms
Default: 500ms
Description: This value must be a multiple of 100. It is better to set the Join timers on all
GMRP-enabled ports to the same time.
Leave Timer
Range: 100ms~327600ms
Default: 3000ms
Description: This value must be a multiple of 100. It is better to set the Leave timers on all
GMRP-enabled ports to the same time.
3. Add a GMRP agent entry, as shown in the following figure.
Figure 123 GMRP Agent Entry Configuration
MAC
Format: HHHHHHHHHHHH (H is a hexadecimal number.)
Function: Configure the MAC address of multicast group. The lowest bit of the first byte is 1.
VLAN ID
Options: all created VLAN numbers
Function: Configure the VLAN ID for the GMRP agent entry.
Description: GMRP agent entry can only be forwarded from the propagation port with the
VLAN ID same as this entry's VLAN ID.
Member Port List
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
