Advanced Configuration
96
Forward Delay Time
Range: 4~128s
Default: 15s
Function: Configure status change time from Discarding to Learning or from Learning to
Forwarding.
Message-age Increment
Options: Compulsion/Default
Default: Default
Function: Configure the value to be added to message age when a BPDU passes through a
network bridge.
Description: In compulsion mode, the value is 1.
In default mode, the value is max(max age time/16, 1).
Forward Delay Time, Max Age Time, and Hello Time shall meet the following requirements:
2 x (Forward Delay Time
– 1.0 seconds) ≥ Max Age Time;
Max Age Time ≥ 2 x (Hello Time + 1.0 seconds).
3. Enable RSTP on ports, as shown in the following figure.
Figure 95 Port Settings
Protocol State
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
