Switch Access
11
PC and the switch.
1. Enter "
telnet
IP address
" in the Run dialog box, as shown in the following figure.
Figure 6 Telnet Access
Note:
For details about how to confirm the switch IP address, see section 5.1 IP Address.
2. In the Telnet interface, input "admin" in User, and "123" in Password. Press <Enter> to log
in to the switch, as shown in the following figure.
Figure 7 Telnet Interface
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
