KYLAND Technology SICOM3024P, Web Operation Manual

Page: 55 / 147

Advanced Configuration
48
1.Create trunk group 1 on Switch A and add port 2, port 3, and port 4 to the group, as shown
in Figure 47.
2.Create trunk group 1 on Switch B and add port 2, port 3, and port 4 to the group, as shown
in Figure 47.
6.6 Link Check
6.6.1 Overview
Link Check detects the data transmission of redundancy protocol-enabled ports. Link check
helps to detect the anomaly for timely processing when a fault occurs
6.6.2 Web Configuration
The following figure shows the link check configuration.
Figure 50 Link Check Configuration
Administration Status
Options: Enable/Disable
Default: Enable
Description: The function can be enabled only on a redundant protocol-enabled port.
Caution:
If the peer device does not support the function, the function shall be disabled on the connected