Advanced Configuration
70
condition is met.
Same IP Address
Options: Disable/Yes/No
Default: Disable
Function: Check whether the source IP address of a packet is identical with its destination IP
address.
Disable indicates the rule is not used.
No indicates the condition is met if the source IP address of a packet is different from its
destination IP address.
Yes indicates the condition is met if the source IP address of a packet is identical with its
destination IP address.
Same L4 Port
Options: Disable/Yes/No
Default: Disable
Function: Check whether the source Layer-4 port number of a packet is identical with its
destination Layer-4 port number.
Disable indicates the rule is not used.
No indicates the condition is met if the source Layer-4 port number of a packet is different
from its destination Layer-4 port number.
Yes indicates the condition is met if the source Layer-4 port number of a packet is identical
with its destination Layer-4 port number.
TCP/UDP Valid
Options: Disable/Yes/No
Default: Disable
Function: Check whether the received packet is a TCP/UDP packet.
Disable indicates the rule is not used.
Yes indicates the condition is met if the received packet is a valid TCP/UDP packet.
No indicates the condition is met if the received packet is not a valid TCP/UDP packet.
TCP Frame Valid
Options: Disable/Yes/No
Summary of Contents for SICOM3024P
Page 13: ...Product Introduction 6 management software and SNMP network monitoring...
Page 25: ...Device Status 18 Figure 15 System Operating Information SICOM3024...
Page 73: ...Advanced Configuration 66 Figure 67 Setting ACL Entry Parameters Group 2...
Page 145: ...Advanced Configuration 138 Figure 137 Dynamic Unicast FDB Table...
