manualshive.com logo in svg

Kostal INVEOR MA, Operating Manual

Share
Download
Kostal INVEOR MA Operating Manual Download Page 85

 Optional 

accessories 

 

 Operating manual INVEOR 

85 

8.2

 

MMI manual control unit including a 3 m RJ11 
connection cable on an M12 plug 

The MMI manual control unit (part no. 10004768) is connected to the inte-
grated M12 interface of the INVEOR. This operating unit allows the user to 
write (program) and/or to visualize all the parameters of the INVEOR. Up to 8 
complete data records can be stored in an MMI and copied to other INVEOR. 
As an alternative to the free INVEORpc software, a complete commissioning 
is available, external signals are not necessary. 

8.3

 

PC communication cable USB on M12 plug 
(converter RS485/RS232 integrated) 

As an alternative to the MMI manual control unit, an INVEOR can also be put 
into operation using the PC communication cable (part no. 10023950) and 
the INVEORpc software. The INVEORpc software is available free of charge at 
the KOSTAL homepage under www.kostal.com/industrie. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for INVEOR MA

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands