Optional
accessories
Operating manual INVEOR
83
If the mounting holes are outside the positions indicated, countersunk screws
must be used to avoid fouling the attachment of the INVEOR.
If the existing flat seals are in a good condition, they should be reused.
8.1.2
Motor adapter plates (specific)
In addition to the standard engine adapter plates (with integrated terminal
boards), there are also specific versions for various engine suppliers available
(on request).
8.1.3
Wall adapter plates (standard)
A standard wall adapter plate (with an integrated terminal board) is available
for each INVEOR installation size. Download the 3D files for INVEOR and
adapter plates under www.kostal.com/industrie. Four holes for mounting the
adapter plate, as well as an EMC screw connection, are already present.
INVEOR
installation size
A B C
Power [kW]
0.55 to 1.5
2.2 to 4
5.5 to 7.5
Designation
ADP MA WDM 0000
A00 000 1
ADP MB WDM 0000 A00
000 1
ADP MC WDM 0000
A00 000 1
Part no.
10023107 10026185 10025932
Fig. 24: Hole pattern for BG A standard wall adapter plate
Summary of Contents for INVEOR MA
Page 1: ...Operating manual INVEOR Betriebsanleitung_INVEOR_A5 indd 1 28 02 11 10 33...
Page 91: ...Guidelines Norms and Standards Operating manual INVEOR 91...
Page 92: ...Guidelines Norms and Standards 92 Operating manual INVEOR...
Page 93: ...Guidelines Norms and Standards Operating manual INVEOR 93...
