Parameters
64
Operating manual INVEOR
The dimming is performed by a PI controller that works in dependence on the
current difference.
The entire function can be deactivated by setting the “motor current limit
in %” parameter (5,070) to zero.
5.070
Motor current limit
Unit: %
min: 0
max.: 250
Parameter manual:
p. xy
Transfer status:
2
def.: 0
own value (
to
be entered!
)
Relationship to
parameter:
5,071
33,031
0 = disable
5.071
Motor current limit
Unit: s
min: 0
max.: 100
Parameter manual:
p. xy
Transfer status:
2
def.: 1
own value (
to
be entered!
)
Relationship to
parameter:
5,070
33,031
5.3.12
Stall detection
5.080
Stall detection
Unit: integer
min: 0
max.: 1
Parameter manual:
p. xy
Transfer status:
2
def.: 0
own value (
to
be entered!
)
Relationship to
parameter:
5,081
This parameter can be used to activate stall detection.
0 = disable
1 = enable
5.081
Blocking time
Unit: s
min: 0
max.: 50
Parameter manual:
p. xy
Transfer status:
2
def.: 2
Own value (
to
be entered!
)
Relationship to
parameter:
5,080
Indicates the time after which a blockage is detected.
Summary of Contents for INVEOR MA
Page 1: ...Operating manual INVEOR Betriebsanleitung_INVEOR_A5 indd 1 28 02 11 10 33...
Page 91: ...Guidelines Norms and Standards Operating manual INVEOR 91...
Page 92: ...Guidelines Norms and Standards 92 Operating manual INVEOR...
Page 93: ...Guidelines Norms and Standards Operating manual INVEOR 93...
