manualshive.com logo in svg

Kostal INVEOR MA, Operating Manual

Share
Download
Kostal INVEOR MA Operating Manual Download Page 17

 

Installation 

 

 Operating manual INVEOR 

17 

2.3

 

Description of the INVEOR drive control 

The INVEOR drive control is a device for speed control in three-phase a.c. 
motors.  

The drive control can be integrated in the motor (with the standard adapter 
plate) or close to the motor (with the wall installation adapter plate). 

The permitted ambient temperatures specified under Technical data refer to 
operation at nominal load. In many cases of application, higher temperatures 
may be permitted after a detailed technical analysis. These have to be 
approved by KOSTAL for each individual case. 

 

3

 

Installation 

3.1

 

Safety instructions during installation 

 

 WARNING 

  Installation may be performed only be appropriately qualified employees 

who are trained in the set-up, installation, start-up and operation of the 
product. Work performed on the drive control by unqualified staff and non-
observance of warnings can result in serious injury or damage. 

  The device must be grounded in accordance with DIN EN 61140; VDE 

0140, NEC and other relevant standards. Mains connections must be 
hardwired. 

 

 

 

 

 

 

 

 

 

Summary of Contents for INVEOR MA

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands