Optional accessories
82
Operating manual INVEOR
Fig. 22: Hole pattern for BG B standard adapter plate
Fig. 23: Hole pattern for BG C standard adapter plate
When using raised-cylindrical head screws (cf. DIN 912 / DIN 6912) or flat
head screws (cf. DIN EN ISO 7380), the hole pattern must be drilled in
compliance with the applicable drawing on the INVEOR mounting frame. The
drill-hole centres should be on the respective centre lines of the slots
illustrated on the diagram.
If the mounting frame is to be attached to a connection box that has no
square hole pattern, then the drawing’s diagonal centre lines are decisive.
Summary of Contents for INVEOR MA
Page 1: ...Operating manual INVEOR Betriebsanleitung_INVEOR_A5 indd 1 28 02 11 10 33...
Page 91: ...Guidelines Norms and Standards Operating manual INVEOR 91...
Page 92: ...Guidelines Norms and Standards 92 Operating manual INVEOR...
Page 93: ...Guidelines Norms and Standards Operating manual INVEOR 93...
