Korg Electronic Keyboard Parameter Manual Download | Manualshive

Page: 475 / 1127

background image

Sequencer P1: EQ/Vector/Controller 1–9: Set Up Pads

465

Off:

Select this to disable the note.

C–1…G9:

This sets the note number.

001…127:

This sets the note’s velocity value. For more

information on pads and velocity, please see “Pad
Mode: Fixed Velocity vs. Velocity Sensitive” on
page 465.

Pad Mode: Fixed Velocity vs. Velocity Sensitive

Each pad stores a velocity level for each of its 8 notes.
The

PAD MODE

button, to the right of the pads,

controls whether or not the pads respond to how hard
you play. Its setting is stored with each Program,
Combi, and Song.

In

Fixed Velocity

mode, the pads always use their

stored velocity settings, regardless of how hard you
play.

In

Velocity Sensitive

mode, hitting the pad very

strongly produces the preset velocities. When you play
more softly, the preset velocities are scaled down
accordingly, maintaining the balance between the
notes in the chord.

Assigning notes and chords to pads

You can assign single notes and chords to the pads in
three different ways.

Play the notes, and then press CHORD ASSIGN

1. Play a single note, or a chord of up to 8 notes.
2. Press the CHORD ASSIGN button.
3. Press the pad to which you’d like to assign the

notes.

That’s it! The notes are now assigned to the pad.

Press CHORD ASSIGN, and then play notes

This method lets you create a chord out of widely-
spaced notes, even if you can’t play all of the notes
simultaneously.

1. Press the CHORD ASSIGN button.
2. Play a single note, or a chord of up to 8 notes.

You can play a single note, or a simple chord.

If you like, you can also play up to 8 notes as a legato
phrase. As long as you take care that the notes overlap
each other, the entire phrase will be recorded as a
single chord. You can take as long as you like to play
the phrase.

3. Press the pad to which you’d like to assign the

notes.

After pressing the pad, you’re done!

Edit notes and velocities using the LCD

You can edit the recorded notes and velocities using
the on-screen parameters. If you like, you can also
enter new notes this way. For more information, please
see “Pad 1,” above.

Copying and Merging Pads

Just as you can assign notes to a pad by playing them
on the keyboard, you can press a pad to copy its
assigned notes to another pad.

The method is similar to steps

1

-

3

above; press the pad

that you want to copy, and then press the CHORD
ASSIGN switch. Then press the copy-destination pad;
the assignments will be copied.

You can also use this to combine the assignments of
two or more pads, up to a maximum of eight notes. To
do so, just press all of the “copy from” pads
simultaneously, and then proceed as above.

For more detailed instructions, please see “Drum &
Chord Pads” on page 48 of the Operation Guide.

Pad 2…8

These are the same as for Pad 1, as described above.

▼

1–9: Page Menu Commands

The number before each command shows its ENTER +
number-key shortcut. For more information on these
shortcuts, see “ENTER + 0-9: shortcuts for menu
commands” on page 138.

• 0:

Memory Status

. For more information, see

“Memory Status” on page 524.

• 1:

Exclusive Solo

. For more information, see

“Exclusive Solo” on page 138.

• 2:

Rename Song

. For more information, see

“Rename Song” on page 524.

• 3:

Delete Song

. For more information, see “Delete

Song” on page 524.

• 4:

Copy From Song

. For more information, see

“Copy From Song” on page 524.

• 5:

Load Template Song

. For more information, see

“Load Template Song” on page 524.

• 6:

Save Template Song

. For more information, see

“Save Template Song” on page 525.

• 7:

FF/REW Speed

. For more information, see

“FF/REW Speed” on page 525

• 8:

Set Location

(for Locate Key.) For more

information, see “Set Location (for Locate Key)” on
page 525.

• 9:

GM Initialize

. For more information, see “GM

Initialize” on page 526.

• 10:

Copy From Combination

. For more

information, see “Copy from Combination” on
page 526.

• 11:

Copy From Program

. For more information, see

“Copy From Program” on page 526.

• 12:

Copy Pad Setup

. For more information, see

“Copy Pad Setup” on page 144.

«
...
473
474
475
476
477
...
»

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Brand: R-Go Pages: 11

Brand: Garmin Pages: 14

Brand: Garmin Pages: 14

Brand: FEKER Pages: 4

Brand: Kurzweil Pages: 374

Brand: Radio Shack Pages: 80

Brand: C.Giant Pages: 76

ELECTRONIC SPEEDOMETER 1323

Brand: VDO Pages: 2

Brand: Datadesk Pages: 4

Brand: Hamlet Pages: 9

Brand: Autostart Pages: 8

SXKC211 - ELECTRONIC KEYBOARD

Brand: Panasonic Pages: 36

Brand: XUMA Pages: 8

PortaSound VSS-30

Brand: Yamaha Pages: 9

Computer-related

Brand: Yamaha Pages: 14

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 32

PortaSound VSS-30

Brand: Yamaha Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands