manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, manualshive.com.

Share
Download
background image

Combination mode

356

Time

[0ms…60sec]

This parameter lets you set the Hold Time in seconds 
and milliseconds. It applies only when the 

Mode

 is set 

to Time.

(Base Note)

[Off, 

 

… 

 ]

This menu sets a basic rhythmic value for the Hold 
Time, relative to the system tempo. The values range 
from a 32nd note to a whole note, including triplets. 

This parameter applies only when the 

Mode

 is set to 

Tempo.

x (Multiply Base Note by…)

[01…32]

This multiplies the length of the 

Base Note

. For 

instance, if the 

Base Note

 is set to a sixteenth note, and 

the multiplier is set to 3, the Hold Time will last for a 
dotted eighth note.

Transition

This sets the length of time that the EG takes to move 
from Point 0 to Point 1. 

When the 

Loop Type

 is set to 0<->3, this also sets the 

time that it takes to move from Point 1 to Point 0 
during the backwards section of the loop.

Time

[0ms…60sec]

This parameter lets you set the Transition time in 
seconds and milliseconds. It applies only when the 

Mode

 is set to Time.

(Base Note)

[

 

… 

 ]

This menu sets a basic rhythmic value for the 
Transition time, relative to the system tempo. It applies 
only when the 

Mode

 is set to Tempo.

x (Multiply Base Note by…)

[01…32]

This multiplies the length of the 

Base Note

. For 

instance, if the Base Note is set to a sixteenth note, and 
the multiplier is set to 3, the EG will move from Point 0 
to Point 1 over a dotted eighth note.

Points 1 and 2

Points 1 and 2 work exactly like Point 0, as described 
above.

Point 3

Point 3 also works much like Points 0–2, with two 
main differences:

Point 3 always uses its own 

Time

 when moving into 

the loop, regardless of the direction of the loop.

If the Loop Repeats is set to Off, or if the Loop is set to 
1-126 and has already played the specified number of 
times, then the EG will stay at Point 3 until the EG 
either goes into release, or is reset by KARMA.

Hold Time

This works just like the 

Hold Time

 for Point 0, as 

described under “Hold Time” on page 355.

Loop

This sets the length of time that it takes to move from 
Point 3 to the first Point in the loop. You can set this in 
either seconds/milliseconds or rhythmic values, 
depending on whether the 

Mode

 is set to Time or 

Tempo.

The 

Time

, 

Base Note

, and 

Multiplier

 parameters work 

just like those for Point 0, as described under 
“Transition” on page 356.

Point 4

Point 4 is the Vector EG’s release destination. Its time 
setting is different from those of the other Points. 
Instead of setting the time it takes to move from Point 4 
to the next Point, it sets how long it takes to go from 
the previous Point to Point 4.

The EG moves to Point 4 as soon as it releases, 
regardless of where it was before the release. For 
instance, let’s say that the EG is in the middle of Point 
2’s Hold Time at note-off. The EG will immediately 
begin to move to Point 4, without waiting for the Hold 
Time to complete.

Release

This sets the length of time that it takes to move to 
Point 4 after note-off. You can set this in either 
seconds/milliseconds or rhythmic values, depending 
on whether the Mode is set to Time or Tempo.

The 

Time

, 

Base Note

, and 

Multiplier

 parameters work 

just like those for Point 0, as described under 
“Transition” on page 356.

KARMA and Vector EG interaction

KARMA can start and re-start the Vector EG in various 
ways, as described below:

CC Control EG

When KARMA is 

On

, it always starts and re-starts the 

CC Control EG, according to the KARMA trigger 
settings. This lets KARMA control sounds or effects in 
synchronization with the KARMA GE.

Volume Control EGs

When 

Key Sync

 is 

Off

, and KARMA is 

On

, KARMA 

will start and re-start the Volume Control EGs as well 
as the CC Control EG. This means that the resulting 
changes in oscillator volumes will be synchronized 
with the KARMA GE.

When 

Key Sync

 is 

On

, KARMA does not affect Vector 

Volume Control. Each note will have its own, 
independent Volume Control EG, just as if KARMA 
was turned off.

Entering the EG’s release stage

Assuming that KARMA is 

On

:

When the 

KARMA LATCH

 switch is 

Off

, the 

KARMA-controlled Vector EG(s) will start to release 
when you remove your hand from the keyboard (and 
when KARMA is no longer receiving any input notes 
from other sources).

When the 

KARMA LATCH

 switch is 

On

, the 

KARMA-controlled Vector EG(s) will start to release 
only when 

KARMA Latch

 is turned 

Off

 again.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

GeBe KP1204 Driver Setup Manual preview
KP1204
Brand: GeBe Pages: 11
C.Giant LP-6210C User Manual preview
LP-6210C
Brand: C.Giant Pages: 76
ENERMAX ACRYLUX WIRELESS Manual preview
ACRYLUX WIRELESS
Brand: ENERMAX Pages: 1
Nav TV MOST-HUR MB User Manual preview
MOST-HUR MB
Brand: Nav TV Pages: 6
Samsung SDS S-PATCH3-Cardio User Manual preview
S-PATCH3-Cardio
Brand: Samsung SDS Pages: 28
VARMILO Victory 67 Series User Manual preview
Victory 67 Series
Brand: VARMILO Pages: 16
Vaporesso TARGET 100 User Manual preview
TARGET 100
Brand: Vaporesso Pages: 8
Yamaha PortaSound PSS-30 (Spanish) Manual Del Propietario preview
PortaSound PSS-30
Brand: Yamaha Pages: 11
Yamaha PortaSound PSS-450 User Manual preview
PortaSound PSS-450
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-570 Owner'S Manual preview
PortaSound PSS-570
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-560 Owner'S Manual preview
PortaSound PSS-560
Brand: Yamaha Pages: 23
Yamaha PortaSound PSS-270 Owner'S Manual preview
PortaSound PSS-270
Brand: Yamaha Pages: 16
Yamaha PortaSound PSS-470 Owner'S Manual preview
PortaSound PSS-470
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-580 (Spanish) Manual De Instrucciones preview
PortaSound PSS-580
Brand: Yamaha Pages: 29
Yamaha PortaSound PSS-360 Owner'S Manual preview
PortaSound PSS-360
Brand: Yamaha Pages: 24
Yamaha PortaSound PSS-290 Owner'S Manual preview
PortaSound PSS-290
Brand: Yamaha Pages: 39
Yamaha PortaSound PSS-580 Operating Manual preview
PortaSound PSS-580
Brand: Yamaha Pages: 50
Yamaha PortaSound PSS-480 Operating Manual preview
PortaSound PSS-480
Brand: Yamaha Pages: 50

Brands by name

Popular brands

Load more brands