Korg Electronic Keyboard, Parameter Manual

Page: 449 / 1127

Sequencer P0: Play/REC 0–9: Control Surface
439
When it is set to
Catch
, you need to move the slider or
knob so that it “catches” the parameter, by passing
through its current value. Until the value is caught,
moving the slider or knob has no effect on the
parameter. Use this when you’d like parameter edits to
be smooth, and always move from the current value.
Reset Controls
The front-panel
RESET CONTROLS
button lets you
recall the stored settings for any slider, knob, or button
on the control surface.
Resetting a single control
To reset individual controls:
1. Hold down the RESET CONTROLS button.
2. While holding down RESET CONTROLS, move a
slider or knob, or press one of the control surface
buttons.
The slider, knob, or button will be reset to the value
stored in the Song.
3. When you’re done, release the RESET
CONTROLS button.
Resetting a group of controls
To reset a group of controls at once:
1. Make sure that the Control Surface is showing the
parameters you want to reset.
As a safety precaution, you can only reset the
parameters currently displayed on the Control Surface.
This takes into account both the current Control Assign
setting, and the
MIXER KNOBS
button.
For instance, if you want to reset the volume and pan
for MIDI Tracks 1–8, make sure that Control Assign is
set to
TIMBRE/TRACK 1–8
, and that
MIXER KNOBS
is set to
INDIVIDUAL PAN
.
2. Hold down the RESET CONTROLS button.
3. While holding down RESET CONTROLS, press
the current Control Assign button again.
All of the sliders, knobs, and switches shown on the
Control Surface will be reset to the values stored in the
Song.
Resetting the Vector Joystick
To reset the Vector Joystick to the center position, hold
down
RESET CONTROLS
and then move the Vector
Joystick.
Resetting KARMA Module parameters
You can also reset all of the sliders and switches in the
KARMA Module, by holding
RESET CONTROLS
and then pressing the KARMA
MODULE CONTROL
button. Similarly, to reset a single KARMA Scene, hold
RESET CONTROLS
and press any of the
SCENE
buttons.
0–9a: Song Select & Tempo
This section duplicates the most important information
from the main Play page.
Song [000…127]
This is the current Song.
Tempo [040.00…240.00, EXT]
This is the tempo for the current Song, which applies to
KARMA, tempo-synced LFOs and Wave Sequences,
and so on.
EXT
means that the tempo will sync to external MIDI
clocks.
040.00…240.00
allow you to set a specific tempo in
BPM, with 1/100 BPM accuracy.
0–9b: MIDI Tracks 1–8 and 9–16
These Control Assign settings lets you adjust the
volume, pan, EQ, and FX send settings for MIDI Tracks
1–8 and 9–16.
Mixer Knobs [Channel Strip, Individual Pan]
The Mixer Knobs switch is on the front panel,
immediately to the right of the knobs, and is also
duplicated in the on-screen display. The eight knobs
can control two different sets of parameters,
depending on the setting of this switch.
Channel Strip:
With this setting, the eight knobs will
control the Pan, EQ, and FX Send settings for the
selected Track. Use the
TIMBRE/TRACK
button to
select a group of 8 Tracks (1–8 or 9–16), and then use
the
SELECT
buttons to choose the specific Track.
Individual Pan:
With this setting, the knobs will
control the Pan for the current group of Tracks. Knob 1
controls the pan for Track 1 (or 9), knob 2 controls the
pan for Track 2 (or 10), and so on.
Mixer Knobs switch
Knobs 1–8, Channel Strip
When the Mixer Knobs switch is set to Channel Strip,
the knobs provide quick access to the Pan, EQ, and FX
Send parameters. The Pan and EQ parameters
duplicate the similarly-named parameters found on
the Song editing pages; changing them here will
change them in the editing pages, and vice-versa.
Pan [Random, L001…C064…R127]
This controls the stereo pan of the selected Track. A
setting of
L001
places the sound at the far left,
C064
in
the center, and
R127
to the far right.
Random
is available only via the LCD. (Otherwise, it
would be difficult to use the knob to sweep smoothly
from left to right.) With the
Random
setting, each note
will have a different, random pan position.