Korg Electronic Keyboard, Parameter Manual

Page: 58 / 1127

Program mode: HD-1
48
Program P2: OSC/Pitch
These pages control the first and most basic elements
of HD-1’s sounds: the Multisamples that the oscillators
play, and the pitch at which it plays them. For instance,
you can:
• Select Multisamples and Wave Sequences for Single
and Double Programs, or Drum Kits for Drum
Programs.
• Set up velocity splits, crossfades, and layers for
Single and Double Programs.
• Set the basic pitch of the sound, including the
octave, fine tuning, and so on.
• Control pitch modulation from a wide variety of
sources, such as JSX, the ribbon, LFOs, and the
Pitch EG.
Note that when the
Oscillator Mode
is set to
Single
or
Drums
, only Oscillator 1’s filters are active; the pages
for Oscillator 2’s filters will be grayed out.
2–1: OSC1 Basic
HD-1’s sounds are based on samples, and this page lets
you set up all of the basic sample-related settings.
Among other things, you can:
• Select Multisamples and/or Wave Sequences for
the Oscillator (in a Single or Double Program), or
select the Drum Kit for a Drum Program
• Set the Oscillator’s basic pitch
• Create velocity splits and crossfades between
Multisamples and/or Wave Sequences
2–1a: OSC1 Frequency
Octave [–2[32’], –1[16’], +0[8’], +1[4’]]
This sets the basic pitch of the Oscillator, in octaves.
The default is +0[8']. The standard octave of a
multisample is +0 [8'].
Transpose [–12…+12]
This adjusts the pitch in semitones, over a range of ±1
octave.
Tune [–1200…+1200]
This adjusts the pitch in cents, over a range of ±1
octave. A cent is 1/100 of a semitone.
Frequency Offset [–10.0 Hz … +10Hz]
This adjusts the pitch by increments of 0.1 Hz.
Frequency Offset
is different from
Tune
in that, when
used to detune the two oscillators, it can create a
constant beat frequency across the range of the
keyboard.
2–1b: Note-On Control
Delay [0000ms…5000ms, KeyOff]
Use this to create a delay between the time that you
press a key, and the time that the note actually sounds.
This is most useful in Double Programs, for delaying
one oscillator in relation to the other.
2–1PMC
2–1b
2–1d
2–1a
2–1c