manualshive.com logo in svg

Korg Electronic Keyboard, Parameter Manual

The Korg Electronic Keyboard offers a versatile musical experience and endless creative possibilities. Unlock its full potential with the Parameter Manual, a comprehensive guide that gives you control over every aspect of your music. Easily download this essential manual for free from our website, manualshive.com.

Share
Download
background image

EXi: CX-3 Tonewheel Organ

218

emphasized. The Amp section interacts with 
Expression; for more details, see “7–1a: Amp,” on 
page 226.

To allow optimal modulation flexibility, the AMS 
works differently from most other parameters. See 

Mode

, below, for more details.

Expression Minimum

[0…30]

This specifies the minimum level when the Expression 
Level parameter or Expression AMS are at 0.

Expression Level

[0…99]

This sets the default Expression level. It will be grayed 
out if the 

Mode

, below, is set to 

Control Only

.

AMS

[List of AMS Sources]

This selects an AMS source to modulate Expression. 
For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

This parameter is grayed out if 

Mode

, below, is set to 

Level Only

.

NOTE

: The MIDI Expression controller (CC #11) is 

hard-wired to scale the channel volume level. So, 
despite the similar name, it’s best to use another 
controller for as an AMS source.

Mode

[Level Only, AMS Only,

Both Scale, Both Overwrite]

This controls how the AMS interacts with the 
programmed 

Expression Level

.

Level Only

: The 

Expression Level

 parameter has 

complete control over Expression. The 

AMS

 parameter 

is grayed out and has no affect.

AMS Only

: The AMS input has complete control over 

Expression, while the Expression Level parameter is 
grayed out and has no affect.

Both Scale

: The values of 

Expression Level

 and AMS 

are multiplied to produce the Expression level. For the 
math-friendly, a value of 99 is treated as 1.0.

Both Overwrite

: 

Expression Level

 and 

AMS

 both 

write directly to the Expression level. If the 

Expression 

Level

 parameter is updated, it directly controls 

Expression, and the last value from AMS is ignored. If 
the AMS input moves, it also directly controls 
Expression, and the setting of the 

Expression Level

 

parameter is ignored.

4–2c: Wheel Brake

Tone wheel organs actually have physical wheels, 
which gradually come up to speed when you turn the 
power on, and gradually slow to a stop when you turn 
the power off. As the wheels rotate more quickly, the 
pitch rises; as they slow down, the pitch falls. 

This section models this behavior, for use as a special 
effect.

Wheel Brake

[Off, On]

This parameter allows you to manually control the 
Wheel Brake. Off is the default; the tone wheels will 
turn normally. Changing this to On will make the tone 
wheels gradually slow down, and eventually stop 
altogether.

AMS

[List of AMS sources]

This selects an AMS source to control the Wheel Brake. 

For a list of AMS sources, see “AMS (Alternate 
Modulation Source) List” on page 967.

AMS Mode

[Toggle, Momentary]

This parameter controls the way in which the Wheel 
Brake AMS works.

When this is set to 

Toggle

, the Wheel Brake AMS will 

alternate between “power on” and “power off.” For 
instance, if 

Wheel Brake

 is set to 

Off

, and 

AMS

 is 

assigned to a footswitch, the first press will cause the 
wheel rotation to slow, and the next press will bring 
them back up to speed again.

Momentary

 means that the power is turned “off” only 

while the controller is enabled. Continuing the 
example from above, when the footswitch is pressed 
down, the wheel rotation will slow down; when the 
footswitch is released, the wheel rotation will speed up 
again.

AMS lets you switch to the opposite of the 
programmed setting. For instance, if 

Wheel Brake

 is 

set to 

On

 (unlikely but possible!), and the 

AMS Mode

 

is set to 

Momentary

, then pressing down on the 

footswitch would cause the tone wheels to come up to 
speed.

If you set AMS to use a continuous controller, such as 
the Joystick, values of 0-63 are as if the switch was off, 
and values of 64–127 are as if the switch was on.

Finally - note that the assignable switches, 

SW1

 and 

SW2

, can themselves be set to either momentary or 

toggle modes, and these settings are reflected by the 
switch LEDs. Individual parameter mode settings, 
such as the Wheel Brake AMS Mode, do 

not

 affect the 

LEDs. 

So, if you’re using SW1 or SW2 as the AMS source, it’s 
best to set the AMS Mode to Momentary, and then just 
let the switch itself determine the momentary/toggle 
behavior.

Wheel Brake Speed

[Slow, Fast]

This controls the speed at which the wheels will slow 
down and speed up.

▼ 

4–2: Page Menu Commands

The number before each command shows its ENTER + 
number-key shortcut. For more information on these 
shortcuts, see “ENTER + 0-9: shortcuts for menu 
commands” on page 138.

• 0: 

Write Program

. For more information, see “Write 

Program” on page 138.

• 1: 

Exclusive Solo

. For more information, see 

“Exclusive Solo” on page 138.

Summary of Contents for Electronic Keyboard








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Electronic Keyboard

Saab 12 787 887 Installation Instructions Manual preview
12 787 887
Brand: Saab Pages: 12
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
Bontempi 16 5415S Assembly Instructions Manual preview
16 5415S
Brand: Bontempi Pages: 34
Accessory Power ENHANCE PATHOGEN ENPAKNO100BKUS User Manual preview
ENHANCE PATHOGEN ENPAKNO100BKUS
Brand: Accessory Power Pages: 21
Samsung SDS S-PATCH3-Cardio User Manual preview
S-PATCH3-Cardio
Brand: Samsung SDS Pages: 28
Targus AKB867 User Manual preview
AKB867
Brand: Targus Pages: 15
Behavioral Technology Group 9051H Quick Installation Manual preview
9051H
Brand: Behavioral Technology Group Pages: 2
Palm P10873U Handbook preview
P10873U
Brand: Palm Pages: 16
Evolve LK642 User Manual preview
LK642
Brand: Evolve Pages: 4
Tecknet X373 Instructions Manual preview
X373
Brand: Tecknet Pages: 6
Tecknet X331 User Manual preview
X331
Brand: Tecknet Pages: 8
Tecknet X315 User Manual preview
X315
Brand: Tecknet Pages: 18
Franklin IC-126 User Manual preview
IC-126
Brand: Franklin Pages: 17
USASPEC BT35-HON Owner'S Manual preview
BT35-HON
Brand: USASPEC Pages: 11
Waeco MagicWatch MW650 Installation And Operating Manual preview
MagicWatch MW650
Brand: Waeco Pages: 196
Roland F-120R Owner'S Manual preview
F-120R
Brand: Roland Pages: 44
Goldtouch GTN-0099 User Manual preview
GTN-0099
Brand: Goldtouch Pages: 2

Brands by name

Popular brands

Load more brands