6. Periodical check
Field Service Ver. 2.0 Mar. 2006
26
bizhub C250P
Maintenance
10.
Remove the C-ring [15] and Bushing
[16], and remove the Shaft Assy [17].
11.
Remove two E-rings [18] and Bush-
ing [19], and remove the Tray 2 Pick-
up Roller fixing plate Assy [20].
12.
Remove the C-ring [21] and Tray 2
Feed Roller [22].
13.
Select [Service Mode]
→
[Counter]
→
[Life] of the Jig software and clear
the count of [2nd.].
6.5.7
Replacing the Tray 2 Pick-up Roller
1.
Remove the Tray 2 Separation Roller
installation plate Assy.
• See the procedures 1 to 5 in “Tray 2
Separation Roller.”
2.
Remove the Tray 2 Right Rear
Cover.
See P.80
3.
Disconnect the Connector [1].
[16]
[15]
[17]
4038F2C512DA
4038F2C513DA
[18]
[18]
[19]
[20]
4036fs2596c0
[21]
[22]
[1]
4038F2C014DA
bizhub_C250P_Total.book 26 ページ ２００６年３月２７日 月曜日 午前８時２８分
