Field Service Ver. 2.0 Mar. 2006
17. Jig Soft
249
bizhub C250P
Adjustment / Setting
17.9.4
Foolscap Size Setting
17.9.5
Install Date
17.9.6
Initialization
A. Data Clear
B. System Error Clear
Functions
• To set the size for Foolscap paper.
Use
• Upon setup.
• To change the size for Foolscap paper.
Setting/
Procedure
• Select the size from among the following five.
220 x 330 mm
8 1/2 x 13
8 1/4 x 13
8 1/8 x 13 1/4
8 x 13
Functions
• To register the date the main unit was installed.
Use
• Upon setup.
Setting/
Procedure
1.
Call the Service Mode on the screen.
2.
Select the key as follows.
[System 1]
→
[Install Date].
3.
Enter the date (Year 4 digit
→
Month 2 digit
→
date 2 digit) from the 10-Key Pad.
4.
Click [Entry] to set the date of installation.
Functions
• To initialize the setting data.
Use
• To clears the setting data.
• For details on items to be cleared, “Contents to be cleared by Reset function.”
See P.283
NOTE
• When removing or installing the hard disk after registering the data below, be
sure to clear the data.
Referring data: One-Touch Registration, User Authentication/Account Track.
Setting/
Procedure
1.
Call the Service Mode on the screen.
2.
Select the key as follows.
[System 1]
→
[Initialization]
→
[Data clear].
3.
Press the Start key.
4.
When [OK] is displayed, turn off the Main Power Switch and turn it on again more
than 10 seconds after.
Functions
• To reset the trouble data.
Use
• Use to clear the [Jam], [Trouble], [Error] displays, and other improper displays.
• For details on items to be cleared, “Contents to be cleared by Reset function.”
See P.283
Setting/Pro-
cedure
1.
Call the Service Mode on the screen.
2.
Select the key as follows.
[System 1]
→
[Initialization]
→
[System Error Clear].
3.
Press the Start key.
4.
When [OK] is displayed, turn off the Main Power Switch and turn it on again more
than 10 seconds after.
bizhub_C250P_Total.book 249 ページ ２００６年３月２７日 月曜日 午前８時２８分
