10. Firmware upgrade
Field Service Ver. 2.0 Mar. 2006
68
bizhub C250P
Maintenance
C. Forwarding Access Setting
• To make the access setting for the Program Server which stores the Firmware data.
1.
Start the Jig software and select [Service Mode]
→
[Internet ISW].
2.
Click [Forwarding Access Setting].
3.
Select [User ID], and enter the user ID which is necessary for connecting to the Pro-
gram Server on the on-screen keyboard, and click [END].
4.
Select [Password], and enter the Password which is necessary for connecting to the
Program Server on the on-screen keyboard, and click [END].
5.
Select [URL], and enter the directory which stores the Program Server Address and the
Firmware on the on-screen keyboard by URL method, and click [END].
NOTE
• Enter the URL which matches to the Protocol to be used.
When connecting to http
http://(host name or IP address)/directory name
or https://(host name or IP address)/directory name
When connecting to ftp
ftp://(host name or IP address)/directory name
6.
Select [File Name], and enter the file name of the Firmware data to be downloaded on
the on-screen keyboard, and click [END].
7.
Click [END] to finish setting.
4037F2E622DA
bizhub_C250P_Total.book 68 ページ ２００６年３月２７日 月曜日 午前８時２８分
