Konica Minolta BIZHUB C250P, Service Manual

Page: 205 / 422

14. User Setting Field Service Ver. 2.0 Mar. 2006
164
bizhub C250P
Adjustment / Setting
3. Print Service
4. Workgroup
F. SNMP
(1) SNMP Setting
(2) UDP Port Number
(3) v1/v2c Setting
Functions • To set the Print service name.
Use • To set the Print service name.
Setting/
Procedure • Enter the Print Service name. (up to 13 characters)
Functions • To set the Workgroup.
Use • To set the Workgroup.
Setting/
Procedure • Enter the Workgroup. (up to 15 characters)
Functions • To set whether to use SNMP (Simple Network Management Protocol) or not.
• To set the SNMP Version to be used.
Use • Not to use SNMP.
• To readout Management Information Base and to enter Community name for writing.
Setting/
Procedure • The default setting is ON.
“ON” OFF
<SNMP v1/v2c (IP), SNMP v3 (IP), and SNMP v1 (IPX)>
• The default setting is ON.
“ON” OFF
Functions/
Use • To set the UDP standby Port Number which is used for SNMP (IP).
Setting/
Procedure • Enter the Port Number between 1 and 65535.
Functions • To conduct setting when using SNMP v1/v2c.
Use • To use when changing Write setting.
• To use when entering the Community Name for reading the Management Information
(MIB) and writing to it.
Setting/
Procedure <Read Community>
• Enter the Read Community Name. (up to 15 characters)
<Write Setting>
• The default setting is Enable.
“Enable” Disable
<Write Community>
• Enter the Write Community Name. (up to 15 characters)
bizhub_C250P_Total.book 164 ページ ２００６年３月２７日 月曜日 午前８時２８分