16. TECH. REP. MODE
Field Service Ver. 2.0 Mar. 2006
204
bizhub C250P
Adjustment / Setting
16.4.8
Detail on settings
A. System Selection
B. ID Code
C. Detail Set: E-Mail/Modem
(1) Machine Setting
(2) Data/Time
Functions
• To select the system type for remote diagnosis.
Use
• Use to newly build or change the system.
Setting/
Procedure
• The default setting is E-Mail.
“E-Mail”
Modem
Functions
• To register the Service ID.
Use
• Use when registering and changing Service ID.
Setting/
Procedure
1.
Enter a 7-digit code. (0000001 to 9999999)
2.
Press the Menu/Select key to register the ID.
3.
The “Detail Setting” key will appear when the ID has been registered.
Functions
• Execute the primary setting.
Use
• Use to change the set contents.
• Use to register the machine to the CS Remote Care Center.
Setting/
Procedure
1.
Select the CS Remote Care
→
ID Code.
2.
Input the ID Code, and press the Menu/Select key.
3.
Select the Detail Set: Modem or the Detail Set: E-Mail, and press the Menu/Select
key.
Primary Setting
• Set the Center ID, Device ID, and the phone No.
• When e-mail is selected for system and all setup procedures are completed, E-mail
address of the Center is displayed.
* When entering the phone No, 10-Keys and keys on the screen have following mean-
ings.
[-] Pose
: Waits to start transmitting after dialing
[W] Wait
: Detects the dial tone of the other end
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*],[#]
: To be used as necessary
Initial Transmission
• Clicking the Initial Transmission key will sent the information to the CS Remote Care
Center to register the machine.
(Only when the Modem or Fax is selected on the system Input.)
1
Functions
• To set the data and time-of-day
Use
• Use to set or change the date and time-of-day.
Setting/
Procedure
1.
Enter the date (month, day and year).
2.
Enter the time-of-day.
3.
Enter the time zone.
4.
Press the Menu/Select key to start the clock.
bizhub_C250P_Total.book 204 ページ ２００６年３月２７日 月曜日 午前８時２８分
