17. Jig Soft
Field Service Ver. 2.0 Mar. 2006
268
bizhub C250P
Adjustment / Setting
E. HDD Format
17.13.7
Memory/HDD State
17.13.8
Color Regist
Functions
• To format the hard disk
• The function proceeds in the order of Physical Format to Logical Format.
• If the hard disk is yet to be formatted, the Trouble code “C-D010” will appear. Ignore
this code and continue with the formatting procedure.
Use
• When the hard disk is mounted.
• When the hard disk is to be initialized.
Adjustment
Procedure
1.
Call the Service Mode to the screen.
2.
Click these keys in this order: [State Confirmation]
→
[Memory / HDD Adj.]
→
[HDD
Format].
(1)
Physical Format
1.
Click [Physical Format].
2.
Press the Start key to start the formatting sequence.
3.
The sequence will be automatically terminated as it is completed.
4.
Turn off the Main Power Switch and turn it on again more than 10 seconds after.
(2)
Logical Format (Only when initial is set up)
1.
Click [Logical Format].
2.
Press the Start key to start the formatting sequence.
3.
The sequence will be automatically terminated as it is completed.
4.
Turn off the Main Power Switch and turn it on again more than 10 seconds after.
✽
Formatting the hard disk will erase all data contained in it.
Functions
• To display the condition and amount of the memory and Hard disk.
• To display the mounting condition of the optional Encryption Board (Security Kit
SC-503).
Use
• Use to check the condition and amount of the memory and Hard disk.
• Use to setup the optional Security Kit SC-503.
Setting/
Procedure
• When an add-on memory is mounted, the machine automatically recognizes it
and displays its capacity.
• When the Encryption Board is mounted, the machine automatically recognizes it
and displays [Set].
1
Functions
• To check each of C, M, Y, and K for color shift amount.
• The data is updated after a color shift correction has been made or color shift adjust-
ment has been completed.
Use
• Use for check when color shift is evident.
• Use for adjustment of PH skew.
Setting/
Procedure
• For each of C, M, Y, and K, the color shift amount (in X and Y directions) at two loca-
tions (one at the front and the other in the rear) and the difference in color shift
amount between the front and rear (X and Y directions) are displayed.
• Display unit: dots
• The shift amount is displayed with reference to K for C, M, and Y, and that for K is dis-
played with reference to an ideal position.
bizhub_C250P_Total.book 268 ページ ２００６年３月２７日 月曜日 午前８時２８分
