Field Service Ver. 2.0 Mar. 2006
11. Other
125
bizhub C250P
Maintenance
11.4.2
Image Transfer Belt Unit
1.
Remove the Image Transfer Belt
Unit.
See P.32
2.
Using a dried soft cloth, wipe the
Image Transfer Belt [1].
NOTE
• If it is difficult to clean with dried
soft cloth, dampen a soft cloth with
a solvent.
• Do not wipe out with water.
• When solvent is used to dampen a
cloth, do not use the ones other
than shown below:
isopropyl alcohol, ethyl alcohol,
PPC Cleaner, Sol mix AP-7.
• After cleaned with the solvent,
make printss more than 28-piece of
A3 white paper to eliminate the
image noise.
11.4.3
Tray 1 Feed Roller
1.
Slide out the Tray 1.
2.
Using a soft cloth dampened with
alcohol, wipe the Tray 1 Feed Roller
[1] clean of dirt.
11.4.4
Tray 1 Separation Roller
1.
Slide out the Tray 1.
2.
Remove two Screws [1], and remove
the Tray 1 Paper Separation Roller
mounting bracket Assy [2].
[1]
4038F2C174DA
[1]
4038F2C175DA
[1]
[2]
4038F2C002DB
bizhub_C250P_Total.book 125 ページ ２００６年３月２７日 月曜日 午前８時２８分
