6. Periodical check
Field Service Ver. 2.0 Mar. 2006
22
bizhub C250P
Maintenance
4.
Snap off the C-clip [5], and remove
the spring [6] and the guide plate [7].
Remove the Bypass Paper Separa-
tion Roller Assy [8].
5.
To reinstall, reverse the order of
removal.
6.
Select [Service Mode]
→
[Counter]
→
[Life] of the Jig software and clear
the count of [Manual Tray].
NOTE
• Replace the Bypass Tray Feed
Roller and the Bypass Separation
Roller Assy at the same time.
6.5.5
Replacing the Tray 2 Separation Roller
1.
Slide out the Tray 2.
2.
Open the Vertical transport door.
3.
Remove two Claws [1], and remove
the Vertical transport door [2].
4.
Remove two Screws [3], and remove
the Jam processing cover [4].
NOTE
• Make sure the position of the Mylar
when installing the Jam processing
cover.
4038F2C502DA
[5]
[7]
[6]
[8]
[1]
[2]
4038F2C011DA
[3]
[3]
[4]
4038F2C012DB
OK
NG
bizhub_C250P_Total.book 22 ページ ２００６年３月２７日 月曜日 午前８時２８分
