14. User Setting
Field Service Ver. 2.0 Mar. 2006
148
bizhub C250P
Adjustment / Setting
C. Auto Reset
D. Date/Time
E. Set Date (Adjusting)
14.2.3
Power Save
A. Low Power
B. Sleep Mode
Functions
• To set the period of time until Auto Reset starts.
Use
• To change the period of time until Auto Reset starts functioning.
Setting/
Procedure
• The default setting is 1 min.
“1 min.” (1 to 9, OFF)
Functions
• To set the date/time and the time zone to start the clock.
Use
• To change settings concerning the date/time.
• This setting should be carried out for set up.
Setting/
Procedure
• For time zone, set the time difference with the world standard time.
• Setting range for the time zone: -12:00 to +12:00 (by 30 minutes)
Functions
• Synchronize the time of the Machine and that of the Server.
• The time is displayed only when the time correction setting (SNTP setting) of the
Administrator setting is “ON.”
Use
• To synchronize the time of the Machine and that of the Server.
Setting/
Procedure
• Pressing the Menu/Select key will correct the time.
Functions
• To set the time until Low Power starts operating after the last key operation has been
completed.
• Low Power: To turn LED and LCD OFF, and lower the power consumption.
Use
• To change the time until Low Power starts.
Setting/
Procedure
• The default setting is 10 min.
“10 min.” (10 to 240)
Functions
• To set the time until Sleep Mode starts operating after the last key operation has
been completed.
• Turn all lines OFF except 5 V line for Control.
• “OFF” will only be displayed when “No Sleep” in Service Mode is set.
Use
• To change the time until the Sleep Mode starts.
Setting/
Procedure
• The default setting is 15 min.
“15 min.” (15 to 240) / OFF
bizhub_C250P_Total.book 148 ページ ２００６年３月２７日 月曜日 午前８時２８分
